Floor Clean & Conditioner (Concentrate)

This is a one step cleaner/conditioner for use on all natural stone floors

Contains special additive to help control slippery floors.

WHERE TO USE

Use on all natural stone floor (marble, granite, limestone, slate, flagstone, adoquin etc.) as well as ceramic/porcelain, quarry tile and composition flooring.

DIRECTIONS

Always test area to determine that the desired results will be achieved.

Sweep, dust-mop or vacuum areas of dirt and debris. Add ONE cap-full of Floor Clean to a bucket of water (approx. 3 gallons) for normal cleaning, for heavily soiled or slippery floors, add one cap-full per gallon of water. Thoroughly wet floor, make sure all grout and lower areas are fully wet. Let stand for 5 minutes; rinsing is not necessary. Floor may be buffed with terry cloth or white/soft nylon pad if streaking should occur.